AMX MVP-7500/8400 manual G4 Web Control Settings/G4 Web Control

Setup Pages

G4 Web Control Settings/G4 Web Control Page

An on-board VNC (Virtual Network Computing) server allows the panel to connect to any remote PC running a VNC client. Once connected, the client can view and control the panel remotely. The options on the MVP-7500 G4 Web Control Settings page (FIG. 58) and the MVP-8400 Web Control page (FIG. 59) allow you to enable/disable G4 Web Control functionality.

FIG. 58 G4 Web Control Settings Page (MVP-7500)

FIG. 59 G4 Web Control Page (MVP-8400)

Features on this page include:

G4 Web Control Page

Back:	Saves all changes and returns to the previous page.
WiFi/Wired icon:	The icon to the left of the Connection Status Icon displays whether the current
	connection to the Master is Wireless (image of a radio antenna) or Wired
	(image of three networked computers).
Connection Status icon:	The icon in the upper-right corner of each Setup page shows online/offline state
	of the panel to the master.
	• Bright red - disconnected
	• Bright green - connected. Blinks when a blink message is received to dark
	green every 5 seconds for half a second then go back to bright green.
	• Bright yellow - panel missed a blink message from the master. It will remain
	yellow for 3 missed blink messages and then turn red. It will return to green
	when a blink message is received.
	Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
	Master.

MVP-7500/8400 Modero Viewpoint Wireless Touch Panels 73