AMX MVP-7500/8400 manual Button Commands, Ani, Apf, Bat

Programming

"^" Button Commands

These Button Commands are used in NetLinx Studio and are case insensitive.

All commands that begin with "^" have the capability of assigning a variable text address range and button state range. A device must first be defined in the NetLinx programming language with values for the Device: Port : System (in all programming examples - Panel is used in place of these values).

Variable text ranges allow you to target 1 or more variable text channels in a single command.

Button State ranges allow you to target 1 or more states of a variable text button with a single command.  "." Character is used for the 'through' notation, also the "&" character is used for the 'And' notation.

"^" Button Commands

^ANI	Syntax:
Run a button	"'^ANI-<vt addr range>,<start state>,<end state>,<time>'"
animation	Variable:
(in 1/10 second).	variable text address range = 1 - 4000.
	start state = Beginning of button state (0= current state).
	end state = End of button state.
	time = In 1/10 second intervals.
	Example:
	SEND_COMMAND Panel,"'^ANI-500,1,25,100'"
	Runs a button animation at text range 500 from state 1 to state 25 for 10 second.
^APF	Syntax:
Add page flip	"'^APF-<vt addr range>,<page flip action>,<page name>'"
action to a button	Variable:
if it does not	variable text address range = 1 - 4000.
already exist.	page flip action = Stan[dardPage] - Flip to standard page
	Prev[iousPage] - Flip to previous page
	Show[Popup] - Show Popup page
	Hide[Popup] - Hide Popup page
	Togg[lePopup] - Toggle popup state
	ClearG[roup] - Clear popup page group from all pages
	ClearP[age] - Clear all popup pages from a page with the
	specified page name
	ClearA[ll] - Clear all popup pages from all pages
	page name = 1 - 50 ASCII characters.
	Example:
	SEND COMMAND Panel,"'^APF-400,Stan,Main Page'"
	Assigns a button to a standard page flip with page name 'Main Page'.
^BAT	Syntax:
Append	"'^BAT-<vt addr range>,<button states range>,<new text>'"
non-unicode text.	Variable:
	variable text address range = 1 - 4000.
	button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	new text = 1 - 50 ASCII characters.
	Example:
	SEND_COMMAND Panel,"'^BAT-520,1,Enter City'"
	Appends the text 'Enter City' to the button’s OFF state.

108 MVP-7500/8400 Modero Viewpoint Wireless Touch Panels