AMX MVP-7500/8400 manual Tools, SIP Settings

Setup Pages

Features on this page include:

SIP Settings Page

Back:	Saves all changes and returns to the previous page.
WiFi/Wired icon:	The icon to the left of the Connection Status Icon displays whether the current
	connection to the Master is Wireless (image of a radio antenna) or Wired
	(image of three networked computers).
Connection Status icon:	The icon in the upper-right corner of each Setup page shows online/offline state
	of the panel to the master.
	• Bright red - disconnected
	• Bright green - connected. Blinks when a blink message is received to dark
	green every 5 seconds for half a second then go back to bright green.
	• Bright yellow - panel missed a blink message from the master. It will remain
	yellow for 3 missed blink messages and then turn red. It will return to green
	when a blink message is received.
	Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
	Master.
Status:	This option enables the SIP Stack on startup. If you disable this option, the
	panel will not attempt to read the rest of the configuration and will not register
	with a proxy server. However, point-to-point SIP will still be enabled allowing for
	existing intercom functionality.
Connection State:	This option displays whether you are connected to the proxy server.
Proxy Address:	This option enables you to enter the IP address or DNS name of the proxy
	server that you want to use to register.
Port Number:	The option displays the port you use to connect to the proxy server. The
	standard SIP port is 5060, but some providers use different ports.
STUN Address:	This option enables you to enter the IP address or DNS name of the Simple
	Traversal of UDP through NATs (STUN) server. This field is optional.
Local Domain:	This is the realm used for authentication. This field is optional.
User Name:	This option enables you to enter the user name used for authentication to the
	proxy server. The user name must match an extension defined in the SIP
	Gateway to "register" the panel so it can receive calls. Normally, the user name
	is the same as the phone number assigned to the extension you are using. This
	field is required.
Password:	This option enables you to enter the password for the user at the proxy server.
	This field is optional.

Tools

The Tools button(FIG. 66 and FIG. 67) provides a menu to select either the Panel Connection Logs/Panel Logs

Page section on page 80, the Panel Statistics Page section on page 81, or the Connection Utility Page section on page 83. Select any of the options to access that page.

FIG. 66 Tools menu (MVP-7500)

FIG. 67 Tools menu (MVP-8400)

MVP-7500/8400 Modero Viewpoint Wireless Touch Panels 79