AMX MVP-7500/8400 manual @Psp, @Pst, Ppof

Programming

Page Commands (Cont.)

@PSP	Only 1 coordinate is ever needed for an effect; however, the command will specify both.
Set the show	This command sets the location at which the effect will begin at.
	Syntax:
effect position.
	"'@PSP-<popup page name>;<x coordinate>,<y coordinate>'"
	Variable:
	popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed
	On.
	Example:
	SEND_COMMAND Panel,"'@PSP-Popup1;100,0'"
	Sets the Popup1 show effect x-coordinate value to 100 and the y-coordinate value to 0.
@PST	Syntax:
Set the show	"'@PST-<popup page name>;<show effect time>'"
effect time for the	Variable:
specified popup	popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed
page.	On.
	show effect time = Given in 1/10ths of a second.
	Example:
	SEND_COMMAND Panel,"'@PST-Popup1;50'"
	Sets the Popup1 show effect time to 5 seconds.
PAGE	Flips to a page with a specified page name. If the page is currently active, it will not redraw
Flip to a specified	the page.
	Syntax:
page.
	"'PAGE-<page name>'"
	Variable:
	page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
	Example:
	SEND_COMMAND Panel,"'PAGE-Page1'"
	Flips to page1.
PPOF	If the page name is empty, the current page is used (see example 2). If the popup page is
Deactivate a	part of a group, the whole group is deactivated. This command works in the same way as
	the ’Hide Popup’ command in TPDesign4.
specific popup
	Syntax:
page on either a
specified page or	"'PPOF-<popup page name>;<page name>'"
the current page.	Variable:
	popup page name = 1 - 50 ASCII characters. Name of the popup page.
	page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
	Example:
	SEND_COMMAND Panel,"'PPOF-Popup1;Main'"
	Deactivates the popup page ’Popup1’ on the Main page.
	Example 2:
	SEND_COMMAND Panel,"'PPOF-Popup1'"
	Deactivates the popup page ’Popup1’ on the current page.

MVP-7500/8400 Modero Viewpoint Wireless Touch Panels 101