Setup Pages
74 MVP-7500/8400 Modero Viewpoint Wireless Touch Panels
The Other Settings button (FIG. 60 and FIG.61) provides a menu to select the Cache Settings/Cache Setup page,
Password Setup page, or SIP Settings page (MVP-8400 only). Select any option to access its page.
G4 Web Control Page (Cont.)
G4 Web Control Settings: Sets the IP communication values for the touch panel:
Enable/Enabled The Enable/Enabled button allows you to toggle between the two G4 activation
settings:
•Enable - deactivates G4 Web Control on the panel.
•Enabled - activates G4 Web Control on the panel.
Network Interface Select Displays “Wireless” when the panel is communicating via a Wireless Access
Point (WAP).
Web Control Name Use this field to enter a unique alpha-numeric string to be used as the panel’s
display name within the Manage WebControl Connections window of the
NetLinx Security browser window.
Web Control Password Use this field to enter the G4 Authentication session password required for
VNC access to the panel.
Web Control Port Enter the number of the port used by the VNC Web Server. Default = 5900.
Maximum Number of
Connections Displays the maximum number of users that can be simultaneously connected
to this panel via VNC. Default = 1.
Current Connection Count Displays the number of users currently connected to this panel via VNC.
G4 Web Control Timeout: Sets the length of time (in minutes) that the panel can remain idle (no cursor
movements) before the G4 Web Control session is terminated.
• Minimum value = 0 minutes (panel never times out)
• Maximum value = 240 minutes (panel times out after 240 minutes)
Refer to the Using G4 Web Control to Interact with a G4 Panel section on page 35 for
instructions on using the G4 Web Control page with the web-based NetLinx Security
application.
FIG. 60 Other Settings Menu (MVP-7500)
FIG. 61 Other Settings menu (MVP-8400)