AMX MVP-7500/8400

Programming

123

MVP-7500/8400 Modero Viewpoint Wireless Touch Panels

"^" Button Commands (Cont.)

^IRM

Set the IR

channel.

Pulse the given IR channel for onTime in tenths of seconds. Delay offTime in tenths of a

second before the next IR pulse is allowed. ^IRM allows the command itself to specify the

port number. ^IRM is needed because commands programmed on the panel itself can

only be sent to a single port number. (currently this is defined as 1 only).

Note: The port number of the IR will be the port number assigned in TPD4.

Syntax:

"'^IRM-<port>,<channel>,<onTime>,<offTime>'"

Variable:

port = User-defined port on the device (panel).

channel = 1 - 255 (channel to pulse).

onTime = 1/10th of a second.

offTime = 1/10th of a second.

Example:

SEND_COMMAND Panel,"'^IRM-10,5, 20, 10'"

Sets the port 10 IR channel 5 on time to 1 second and off time to 2 seconds.

^JSB

Set bitmap/

picture alignment

using a numeric

keypad layout for

those buttons with

a defined address

range.

The alignment of 0 is followed by ',<left>,<top>'. The left and top coordinates are relative

to the upper left corner of the button.

Syntax:

"'^JSB-<vt addr range>,<button states range>,<new text alignment>'"

Variable:

variable text address range = 1 - 4000.

button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons

1 = Off state and 2 = On state).

new text alignment = Value of 1- 9 corresponds to the following locations:

Example:

SEND_COMMAND Panel,"'^JSB-500.504&510.515,1&2,1'"

Sets the off/on state picture alignment to upper left corner for those buttons with variable

text ranges of 500-504 & 510-515.

^JSI

Set icon

alignment using a

numeric keypad

layout for those

buttons with a

defined address

range.

The alignment of 0 is followed by ',<left>,<top>'. The left and top coordinates are relative

to the upper left corner of the button.

Syntax:

"'^JSI-<vt addr range>,<button states range>,<new icon alignment>'"

Variable:

variable text address range = 1 - 4000.

button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons

1 = Off state and 2 = On state).

new icon alignment = Value of 1 - 9 corresponds to the following locations:

Example:

SEND_COMMAND Panel,"'^JSI-500.504&510.515,1&2,1'"

Sets the Off/On state icon alignment to upper left corner for those buttons with variable

text range of 500-504 & 510-515.

789

Zero can be used for an absolute position

789

Zero can be used for an absolute position