Tiger RBF-19C manual Safety, Danger

(SG-8)

(SG-5)

(SFL-5)

SAFETY

WARNING! Relieve hydraulic pressure prior to doing any maintenance or repair work on the Implement. Place the Mower Head on the ground or securely supported on blocks or stands, disengage the PTO, and turn off the engine. Push and pull the control Levers or Joystick several times to relieve pressure prior to starting any maintenance or repair

	work. (SBM-6)
DANGER!	Always disconnect the wire leads from the mower valve solenoid before
	performing service on the Tractor or Mower. Use caution when working
	on the Tractor or Mower. Tractor engine must be stopped before
	working on Mower or Tractor. The Mower Blades could inadvertently be
	turned on without warning and cause immediate dismemberment, injury
	or death. (SBM-12)
DANGER!	All Safety Shields, Guards and Safety devices including
	(but not limited to) - the Deflectors, Chain Guards, Steel
	Guards, Gearbox Shields, PTO integral shields , and
	Retractable Door Shields should be used and main-
	tained in good working condition. All safety devices
	should be inspected carefully at least daily for missing
	or broken components. Missing, broken, or worn items
	must be replaced at once to reduce the possibility of
	injury or death from thrown objects, entanglement, or
	blade contact. (SGM-18)
DANGER!	DO NOT allow any person under a raised boom or mower head
	unless it is securely locked up or supported. DO NOT approach the
	Implement unless the Tractor is turned off and all motion has
	ceased. Never work under the frame work, or any lifted component
	unlesstheimplementissecurelysupportedorblockedup. Inadvertent
	contact with the controls could allow a component to fall. A sudden
	or inadvertent fall by any of these components could cause serious
	injury or even death. (SBM-22)

DANGER!

WARNING!

All Safety Shields, Guards and Safety devices including (but not limited to) - the Deflectors, Steel Guards, Gearbox Shields, PTO integral shields , and Retractable Door Shields should be used and maintained in good working condition. All safety devices should be in- spected carefully at least daily for missing or broken components. Missing, broken, or worn items must be replaced at once to reduce the possibility of injury or death from thrown objects, entanglement, or blade con- tact.

Always maintain the safety decals in good readable condition. If the decals are missing, damaged, or unreadable, obtain and install replacement decals immediately.

WARNING! Do not modify or alter this Implement. Do not permit anyone to modify or alter this Implement, any of its components or any Implement function.

RBC - 19C 07-04	Safety Section 1-13
© 2004 Alamo Group Inc.