OPERATION
FLAIL HEAD INSPECTION
¾Inspect blades and blade bolts for looseness and excessive wear. Rotate to 90° to make for checking easier. Replace damaged, worn, and missing blades as complete sets to maintain cuttershaft balance.
¾Ensure rubber deflectors are in position and not damaged. Replace worn, broken, and missing sections immediately.
¾Ensure the rollers are in good condition and rotate freely.
¾Inspect that all bolts and screws are in position and are properly torqued.
¾Ensure hydraulic lines are properly connected to the hydraulic motor. Check for hydraulic leaks along hoses and fittings. DO NOT use your hands to check for oil leaks. Use a piece of heavy paper or cardboard to check for hydraulic oil leaks.
¾Inspect the condition of the drive belts.
¾Ensure the drive belt shields are in place and in good repair.
¾Remove any grass or other debris which may be wrapped around the cuttershafts ends.
¾Inspect the condition of deck skid shoes and hardware.
WARNING! Do not put hands or feet under mower decks. Blade Contact can result serious injury or even death. Stay away until all motion has stopped and the decks are securely blocked up.
Operation Section | |
© 2004 Alamo Group Inc. |
|
