T6000 Saber Assembly Section 2-10
ASSEMBLY
NEW HOLLAND PRIORITY VALVE USED ONDELTA & VALUE UNITS (HUSCO)
The Delta and Value units need a NH priority valve plug in the tractor rear remotes
for the proper hydraulic flow. Torque the body fo the plug first to 94Nm and then the
small end to 15Nm. The ports used are directly under the valve mounting plate. The
illustration below shows these ports are in a row. From left to right the ports are used
for “return from Husco valve”, “plug to allow activation of the next two ports”, “return
from PB port on Husco valve” and “pressure to HP filter”.
The pressure hose is routed from the tractor remotes to the inlet port of the HP Filter
on the valve mounting bracket. Then, the outlet port of the HP Filter to the pressure port
of the lift valve.
The power beyond line is routed from the port on the Husco valve to the power
beyond port on the tractor rear remotes.
The return hose runs from the return port of the Husco valve to the tractor remotes.
For more information refer to the Parts Section pages for a complete diagram of the
tractor valve hookup.
RETURN PORT
PRIORITY VALVE
PLUG POWER BEYOND
PORT
PRESSURE PORT
NEW HOLLAND TRACTOR REMOTES NEW HOLLAND TRACTOR REMOTE
PRIORITY VALVE PLUG