2
TABLE OF CONTENTS |
|
| |
Packaging | page | 2 | |
Introduction | page | 2 | |
General Information | page | 2 | |
Location | .......................................... | page | 3 |
Appliance and Vent Clearances | page | 4 | |
Vent Termination Clearances | page | 5 | |
Typical Installation Sequence | page | 5 | |
Detailed Installation Steps | page | 5 | |
Step 1. | Framing | page | 5 |
Step 2. Routing Gas Line | page | 5 | |
Fireplace Specifications | page | 8 | |
Step 3. Install the Vent System | page | 9 | |
Vertical Termination Systems | page | 10 | |
Vent Section Length Chart | page | 10 | |
Vertical Vent Tables and Figures | page | 13 | |
Horizontal Termination System | page | 15 | |
Horizontal Vent Tables and Figures . page | 17 | ||
Venting Using Flexible Vent Pipe | page | 20 | |
Step 4. | Field Wiring | page | 21 |
Step 5. Optional Blower Kit Wiring | page | 21 | |
Step 6. Connecting Gas Line | page | 22 | |
Step 7. | Installing Logs | page | 22 |
Step 8. | Checking Unit Operation | page | 22 |
Step 9. Installing Glass Door | page | 23 | |
Step 10. Burner Adjustments | page | 23 | |
Step 11. Hood Installation | page | 23 | |
Finishing Requirements | page | 23 | |
Cold Climate Insulation | page | 24 | |
Installation Accessories | page | 25 | |
Gas Conversion Kits | page 26 | ||
This installation manual will help you obtain a safe, efficient, dependable installation for your appliance and vent system.
Please read and understand these instructions before beginning your installation.
PACKAGING
The assembled vented gas fireplace heater is packaged with:
1 - one log set located in firebox area.
2 - one envelope containing the literature package which consists of the homeowner's manual, installation instructions, log set supplement and warranty; envelope is lo- cated in the control area.
3- one vent restrictor to be applied as shown on page 9; restrictor is taped to the envelope.
4 - one hood located behind the top panel.
5 - one bag of decorative volcanic stone lo- cated in the control area.
6 - one bag of glowing embers located in the control area.
INTRODUCTION
These vented gas fireplace heaters are sealed combustion, air circulating gas fireplaces de- signed for residential applications. These ap- pliances must be installed with the Secure Vent™ and /or Secure Flex™ vent systems routed to the outside atmosphere.
Millivolt appliances are designed to operate on natural or propane gas. A millivolt gas control valve with piezo ignition system provides safe, efficient operation. External electrical power is required to operate the optional blower if in- stalled in these units.
Electronic appliances are designed to operate on natural or propane gas. An electronic inter- mittent pilot ignition system provides safe, efficient operation. External electrical power is required to operate these units.
These appliances comply with National Safety Standards and are tested and listed by Omni- Test Laboratories (Report No.
Both millivolt and electronic versions of these appliances are listed by
Installation must conform to local codes. In the absence of local codes, installation must com- ply with the current National Fuel Gas Code, ANSI Z223.1. (In Canada, the current
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
DO NOT ATTEMPT TO ALTER OR MODIFY THE CONSTRUCTION OF THE APPLIANCE OR ITS COMPONENTS. ANY MODIFICATION OR ALTERATION MAY VOID THE WARRANTY, CERTIFICATION AND LISTINGS OF THIS UNIT.
GENERAL INFORMATION
Note: Installation and repair should be per- formed by a qualified service person. The appli- ance should be inspected annually by a quali- fied professional service technician. More fre- quent inspections and cleanings may be re- quired due to excessive lint from carpeting, bedding material, etc. It is imperative that the control compartment, burners and circulating air passage ways of the appliance be kept clean.
S'assurer que le brùleur et le compartiment des commandes sont propres. Voir les in- structions d'installation et d'utilisation qui accompagnent l'appareil.
Provide adequate clearances around air open- ings and adequate accessibility clearance for service and proper operation. Never obstruct the front openings of the appliance.
These appliances are designed to operate on natural or propane gas only.
TYPICAL INSTALLATION
Figure 1
