Program Switch Details

Power Remote

Door Remote

1.Set the mini-jump in the JP1 position for door remote. Relay goes on for

4 seconds when buttons and are pressed.

2.Set the mini-jump in the JP2 position for power remote.

Press buttons and to turn relay on.

Press button to turn relay off.

Note: The unit is set in the JP1 position (door remote) at the factory.

4.3Testing

After: 1. wiring is completed

2. power is turned on and all system functions are checked, then, testing for adjustment should be carried out. The plug for each station should not be connected until the speech test is started.

26

Page 28
Image 28
TOA Electronics EX-16 manual Testing