8 | TOPCOM HBM Sensor Watch 2002 |
|
|
7.1 SETTING TIME AND DATE
In time Current Time mode :
•Press and hold MODE until the seconds are blinking on the display.
•Press ST./STP. to set the seconds to zero.
•Press MODE to switch to minutes.
•Press ST./STP. to increase the minutes or RESET to decrease the minutes.
•Press MODE to switch to hours
•Follow the same instruction as for the minutes to adjust the hour, year, month and day. After setting the date
•Press ST./STP. to select the visualisation of the date (‘month/day’ or ‘day/month’).
•Press MODE to switch hour setting.
•Press ST./STP. to select 24Hours system or 12Hours systems (indication AM/PM)
•Press MODE to switch to the keybeep setting.
•Press ST./STP. to set the keybeep on (ON) or off (OF)
•If the date and time is correct, press and hold MODE to fix the setting.
