Topfield TF 6000 PVR ES manual Over the air, Turn off the target digital receiver

94 Firmware Update

1.Turn off the target digital receiver.

2.Plug one end of a RS-232 cable (9 pin D- sub cable) into the RS-232 port on the dig-

ital receiver, and the other end into the matching port on the other digital receiver.

3. Turn on the source digital receiver if not already on.

4.Select the Installation > Transfer Firmware > Transfer Firmware to Other IRD menu, then you get asked for confirmation; select Yes.

5.Turn on the target digital receiver to start the firmware transfer.

6.A progress bar appears showing the progress of the firmware transfer.

7.Restart the target digital receiver when the firmware transfer is complete.

10.5Over the air

You can get a new firmware over the air.

Select the Installation > Firmware Upgrade menu. You should see a screen like the left figure.

Selecting the Start command starts firmware update.