Toshiba 1405-S152, 1405-S151 Disconnect the touch pad Sumi card from CN1 on the touch pad

Satellite 1400 Series Disassembly Overview, cont.

To remove the touch pad, follow the steps below.

1. Disconnect the touch pad SUMI card from PJ2004 on the system board.

2. Remove one M2x5 silver thin flat-head screw securing the touch pad.

3. LIft out the touch pad.

4. Disconnect the touch pad SUMI card from CN1 on the touch pad.

!

To remove the battery board, follow the steps below.

1. Disconnect the battery cable from PJ8810.

2. Lift out the battery board.

3. Disconnect the battery cable from PJ8811 on the battery board, if neces- sary.

NOTE: On installation, be sure to route the battery cable under the battery board to avoid pinching the battery cable with the plastic cover.

!

To remove the HDD connector board, follow the steps below.

1. Remove two M2x5 silver thin flat-head screws securing the HDD connector board.

2. Carefully lift up the HDD connector board to disconnect it from PJ2000 on the system board.

3. Lift out the HDD connector board.

Toshiba TRR Page 12 7/02, Satellite