7/02, SatelliteToshiba TRR Page 8
Satellite 1400 Series Disassembly Overview, cont.
To remove an optional SD card, follow the steps
below.
1. Turn the computer right side up.
2. Push the SD card in and release it to pop
the card out slightly.
3. Grasp the SD card and remove it.
To remove the HDD, follow the steps below.
1. Turn the computer upside down.
2. Remove one M2.5x4 black flat-head
screw securing the HDD cover.
3. Lift off the HDD cover.
4. Pull the guide to remove the HDD. Be
careful not to damage the connector.
5. Place the HDD pack on a flat surface and
remove four M2x4 silver flat-head
screws.
6. Remove the HDD bracket.
CAUTION: Do not apply pressure to the top or
bottom of the HDD.
To remove a memory module, follow the steps
below.
1. Turn the computer upside down.
2. Remove one M2.5x4 black flat-head
screw.
3. Lift off the memory slot cover.
4. Gently press out on two latches. One
end of the memory module will pop up.
5. Grasp the memory module and remove
it.
CAUTION: Do not try to remove a memory
module with the computer turned on. You can
damage the computer and the memory.
Do not touch the connectors on the memory
module(s) or on the computer. Debris on the
connectors may cause memory access problems.