advanced operation
IDTV Upgrade
The IDTV can be upgraded via the configuration menu, entered from the main menu.
In the configuration menu, there is the "Receiver Upgrade" button. Upgrade pro- cess can be started by pressing this button.
There are two possibilities for IDTV software to be upgraded: automatic and
manual. Automatic upgrade can be enabled or disabled by pressing “
“/“
” buttons. If it is enabled, then there are two ways for automatic upgrade. The first one is checking the existence of a new software every time the IDTV goes to standby. The second one is waking up at 03:00 a.m. every night, provided that the IDTV is left in standby mode. Both automatic upgrade methods result in standby mode either upgraded or not. If the automatic upgrade is set to 'Dis- able' then this function will not work.
Manual upgrade starts if the 'Search for New Version' button is pressed.
After pressing the 'Search for New Version' button, the IDTV tunes to each fre- quency that have been stored in its database and looks for the new software. Since this process takes some time, a warning message is displayed.
Depending on the existence of a new software, two different messages can ap- pear on the screen: 'No new software was found’ or 'New sw loaded. Please wait...'
22
11 05 2004 15:29 |
