Toshiba 17WLT46B owner manual Programme Menu, Setting VCR Video Cassette Recorder Mode, Name

Normally the Fine Tuning cursor is placed next to the left side on the slider and this is indicated with one arrow.

Setting VCR ( Video Cassette Recorder ) Mode

•This item can be seen in TV, AV-1, AV-2, AV-3, S-VIDEO modes.

•If you want to watch a VCR source from one of these modes, then it will be bet- ter to set VCR mode “on”. For this, while the cursor is on this item press the “ ” or “ ” keys to set it “On”.

•If you want to watch a DVD , then you must set this item “off”; because DVD is not a source like a VCR and to see the picture better, you must set the VCR mode “Off”.

To Store Settings

•Press “OK” key on the remote control to store the settings directly.

or,

•Press “”, “ ” or “OK” key on Store op- tion to store Install menu settings.

Programme Menu

•To enter Programme menu directly, press the " INFO" key in TV mode, or

•Press "M" key, now you are in main menu. In the main menu, select “Pro- gram” using “” or “” key. Then enter

the Programme menu, press “ ” / “ ” or “OK” key.

Moving cursor to four direction you can reach 20 programmes in the same page. By scrolling the pages up or down by pressing the navigation keys you can se- lect all the programmes in TV mode (ex- cept the AV mode).

By cursor action, programme selection is done automatically. In order to select programme is also possible by using digit or double-digit key. In this way pro- gramme selection gets also automati- cally. The TV Status is changed by the programme selection too. When using double-digit key in order to select a pro- gramme, the Programme Number in TV Status OSD is displayed in "P --" form, and by pressing digit keys they are dis- played in it.

Programme Number is between 00 and

99.Programme Name has a name string with 4 characters. After autostore process the Programme Names are set to:

•Channel search "C-01" or "S-01" (band and channel number) or name of the tuned channel if defined.

At the bottom of the menu there is a pro- gramme sort functions section. Each function is activated by color key (seen above). Name allows changing the pro- gramme name. By Delete you can delete programmes that you decided. Insert section is for inserting programmes into another programme spaces. By select- ing Autostore section, Autostore menu will be available.

Name:

To change the name of a decided pro- gramme, that programme is selected and pressed to the Red key (Name). The first letter begins to blink on the selected

name. To change that letter “” or “”

48

50052932-1552UK (TOSHIBA UK)17 INCH TFT48-IDTV-WO WM-dilek p65 11 05 2004 15:30