Toshiba 27A35C appendix Adding channels to the TV’s memory, Changing channels

ADJUST

SELECT

Adding channels to the TV’s memory

When you press CH +/- on the remote control or CHANNEL ▼/▲ on the TV front panel, your TV will stop only on the channels stored in the TV’s channel memory. Follow the steps below to program channels into the memory.

Programming channels automatically

Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory auto- matically, you can add or erase specific channels manually.

To add channels automatically:

1.Press MENU, then press or to display the SETUP menu.

2.Press or until the TV/ CABLE selection is highlighted.

3. Press or	to highlight either TV		CH
		PICTURE AUDIO	SETUP OPTION
or CABLE, depending on which
you use.		TV / CABLE	TV CABLE
		CH PROGRAM	START
If you use an antenna, choose TV.		ADD / ERASE	ADD
If you use cable, choose CABLE.		SELECT	ADJUST

4.Press to select CH PROGRAM.

5.Press or to start channel programming. The TV will automati- cally cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory.

While the TV is cycling through the channels, the message “PROGRAMMING NOW-PLEASE WAIT” appears.

6.When channel programming is complete, the message “COMPLETED” appears.

7.Press CH + or – to view the programmed channels.

Adding and erasing channels manually

After you have programmed the channels automatically, you can add or erase specific channels manually.

To add or erase channels manually:

1.Select the channel you want to add or erase.

If you are adding a channel, you must select the channel using the

	Channel Number buttons.
2.	Press MENU, then press or				CH
	to display the SETUP menu.
				PICTURE AUDIO	SETUP OPTION
3.	Press	or	to highlight ADD/
				TV / CABLE	CABLE
	ERASE.
				CH PROGRAM	START
4.	Press	or	to select ADD or
				ADD / ERASE	ADD ERASE

ERASE, whichever function you want to perform.

5.Repeat steps 1–4 for other channels you want to add or erase.

Changing channels

To change to the next programmed channel:

Press CHANNEL ▲/ ▼ on the TV front panel or CH +/– on the remote control.

To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0–9 and 100) on the remote control.

For example, to select channel 125, press 100, 2, 5.

13

Channel

Numbers

Channel +/–

Menu

Safeguards Important

TWelcome oshiba to

yConnecting

ourTV

Remote ControlUsing the

your TVSetting up

FeaturesUsing the TV’s

Appendix

3U50101A(E)_P07-13 13 3/31/05, 6:18 PM