18
PC settings – picture position, clock phase,sampling clock, reset
3
3
Use Sor Rto adjust until the picture clears.
In the SET UP menu press Quntil PC Setting is
highlighted.
Press OKto select, then Qto highlight Clock
phase.
Use Sor Rto adjust until the picture clears.
1
2
The Clock phasematches the PC signal with the LCD
display. Adjusting this can clear horizontal stripes and
picture blur.

Clock phase

In the SETUP menu press Quntil PC Setting is
highlighted.
Press OKto select, then Qto highlight Sampling
clock.
1
2
Adjusting the Sampling clockalters the number of pulses
per scan, this will clear vertical lines on the screen.

Sampling clockPicture position

The picture position may be adjusted to suit personal
preference.
Press Bto select PC, then select PC Setting
from the SETUP menu.
1
Press OK. Press Pand Qto select an option,
then Sor Rto adjust the settings.
2
3
Press OK.
In the SETUP menu press Quntil PC Setting is
highlighted.
Press OKto select, then Qto highlight Reset.
1
2
To return to the original factory settings.

Reset

SETUP
Language English
Country UK
AV connection OK
PC Setting OK
MENU
Back
EXIT
Watch TV
1/2PC Settings
Horizontal position 0
Horizontal width – 5
Vertical position 0
Vertical height – 5
Clock phase 0
Sampling clock 0
MENU
Back
EXIT
Watch TV
1/2PC Settings
Horizontal position 0
Horizontal width – 5
Vertical position 0
Vertical height – 5
Clock phase 0
Sampling clock 0
MENU
Back
EXIT
Watch TV
2/2
PC Settings
Reset OK
MENU
Back
EXIT
Watch TV
gg