20
Text services – setting up, general information, Auto and LIST modes

This television has a multi-page text memory, which takes a few moments to load. It offers two Modes of

viewing text – Autowill display Fastext, if available. LIST will store your four favourite pages.

If Fastext is available four coloured titles will appear at
the base of the screen.
To access one of the four given subjects, press the
relevant coloured button on the remote control.
For further information on your particular text system(s),
see the broadcast text index page or, consult your local
Toshiba dealer.
To access the sub-pages press X(B)then use Pand Q
to view them. A bar with numbers will appear on the side
of the screen.
The sub-page you are viewing will be highlighted and, as
the television loads any additional sub-pages the colour
of the numbers will change, indicating that these pages
have been loaded.
These sub-pages will remain available to view until
another page is chosen or, in normal TV mode, the
channel is changed.
The 6/7button:
To view text services press 6/7. Press again to
superimpose the text over a normal broadcast picture and
again to return to normal viewing.Programmes cannot
be changed until text is cancelled.
The first text page shown will be the initialpage.
In Auto.mode this displays the main subjects available
and their relevant page numbers.
In LISTmode this displays whichever page number is
currently stored on the RED button.
In either mode any text page can be accessed by entering
the 3 digit page number using the numbered buttons,
pressing the coloured buttons or pressing Pf(P) to
advance to the next page and P e(Q) to go back to the
previous page.
Sub-pages
If there are sub-pages they will automatically load into
memory without changing the page on screen.

Navigating pages using Auto.

Text information

The four coloured choices at the bottom of the screen are
numbers – 100, 200, 300 and 400, which have been
programmed into the television’s memory. To view these
pages press the relevant coloured buttons.
To change these stored pages press the relevant coloured
button and enter the 3 digit number. This number will
change in the top left of the screen and in the coloured
highlight.
Press OK to store. The bars at the bottom of the screen
will flash white. Whenever OK is pressed all four
page numbers showing at the bottom will be stored
and the previous ones will be lost.
If OKis not pressed the selection will be forgotten when
text is cancelled.
Other pages may be viewed by entering the 3 digit page
number – but DO NOT press OKor these pages will be
stored.

Navigating pages using LIST

Select Teletextfrom the FUNCTION menu.
With Sor Rchoose Auto. or LIST then press EXIT.
The text character set will be automatically chosen by the
language setting in the SET UPmenu.

Selecting modes

1
2
FUNCTION
Teletext Auto.
Panel lock Off
Auto format On
Grey screen On
Side Panel 1
MENU
Back
EXIT
Watch TV
gg