7
Connecting a computer or component video source
the back of your television
Computer
Audio cable from PC or
component video audio
source to television
(not supplied)
Conversion adaptor if required (not supplied)
RGB PCcable
(not supplied)
Mini D-sub
15p connector
Mini D-sub
15p connector
Component video connector (not supplied)
Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
When connecting to
equipment with component
video output it will be
necessary to connect an audio
cable to the PC/HDMI socket.

☛

Component video
supports 480i, 480p,
576i, 576p, 720p and
1080i signals.

☛

Connect the PC cable from the computer to the PC
terminal on the back of the television.
Press the Bto selectPC mode.
The following signals can be displayed:
VGA:640 x 480/60 Hz (VESA 480-60)
SVGA: 800 x 600/60 Hz (VESA 600-60)
XGA: 1024 x 768/60 Hz (VESA 768-60)
IMPORTANTNOTE: The 27WL model will display
XGA but it will not be to the VESA standard.
PLEASENOTE:
Some PC models cannot be connected to this
television.
An adaptor is not needed for computers with a DOS/V
compatible mini D-sub 15p terminal.
A band may appear at the edges of the screen or parts
of the picture may be obscured. This is due to the
strength of the signal, it is not a malfunction.
When PC input mode is selected some of the
television’s features will be unavailable e.g. Manual
settingin the SET UP menu, Colour, Tint, DNR and
Black Stretchin the Picture settings menu.
Signal information for Mini D-sub 15p connector
Pin assignment
for RGB/PC
terminal
Pin. No. Signal name Pin No. Signal name
1R (P
R*) 9 NC
2 G (Y*) 10 Ground
3B (P
B*) 11 NC
4 NC (not connected) 12 NC
5 NC 13 H-sync
6 Ground 14 V-sync
7 Ground 15 NC
8 Ground
* Component video
gg