8
Side connections and controls
If the red LED is unlit check that the mains plug is
connected to the power supply. If the picture does not
appear press a number button on the remote control, it
may take a few moments.
To put the television into Standby press ion the remote
control. To view the television press iagain. The picture
may take a few seconds to appear.
To set up the television you will now need to use the
on-screen menus. Press the MENUbutton on the
remote control to see the menus.
The menu bar at the top of the screens will show five
different topics shown in symbols. As each symbol is
selected by pressing the Sor Rbutton on the remote
control, its respective options will appear below.
To use the options press theQbutton on the remote
control to move down through them and OK, Sor Rto
select the required choice. Follow the on-screen
instructions. The functions of each menu are described in
detail throughout the manual.

A wide variety of external equipment can be connected via the sockets located on the side of the television.

Whilst all the necessary adjustments and controls for the television are made using the remote control, the

buttons on the top of the television may be used for some functions.

To alter the volume press j+.
To alter the programme position press eeFff.
Press MENUand S,R,Qor Pto control the sound
and picture options.
Press MENUto finish.
When connecting mono sound equipment to EXT3,
connect the audio output of the equipmentto the
L/Monosocket on the television.
To select the Input, press Buntil the display shows
EXT3as described on page 19. The television will
automatically sense the type of signal.
Please always refer to the owner’s manual of the
equipment to be connected for full details.
Please note: Inserting the headphone plug will mute the
sound from all speakers.

Switching on Using the controls and connections

Standby
RED – Power On
GREEN – On-timer set
INPUT3
(EXT3)
The television
screen can swivel
on its foot stand
15 degrees to the
left and right.
32/37WL56
Models only
27WL56
Model only
gg