Toshiba 32A41 up Set, instead of, instead of, Preparation, You will need:, You will need:, Connecting a VCR, •one coaxial cable, • one coaxial cable

Connecting your TV

If you have not connected electronic equipment before, or you have been frustrated in the past, you may wish to read this section. (Cables are not supplied.)

up Set

●A coaxial cable is the standard cable that comes in from your antenna or cable converter box. Coaxial cables use “F” connectors.

●Audio and video cables are usually color-coded according to use: yellow for video; red and white for audio. The red audio cable is for the stereo right channel; the white audio cable is for the stereo (or mono) left channel. If you look at the back panel of the TV, you will see that the terminals are color-coded in the same manner as the cables.

NOTE REGARDING PICTURE QUALITYWhen connecting video equipment, such as a VCR or DVD player:–For GOOD picture quality: Use regular video cables.

–For BETTER picture quality: If your equipment has S-video connections, use S-video cables instead of regular video cables.

–For BEST picture quality: If your equipment has component video connections (ColorStream™ is Toshiba’s brand), use component video cables instead of regular or S-video cables. Component video cables come in sets of three.

Note: Do not connect an S-video cable and a regular video cable to VIDEO-1 (on the TV) at the same time. Doing so will distort the picture.

Antenna Coaxial Cable

AUDIO/VIDEO Cables

S-Video Cable

ColorStream (component video) Cable

Caution:

Do not plug in the TV power cord until you have finished connecting all of your equipment.

Preparation

Operation Basic Advanced

Connecting a VCR

This connection allows you to watch TV and video programs and record one channel while watching another channel.

You will need:•one coaxial cable•one pair of audio cables (one single audio cable for a mono VCR)

•one video cable (for video cable type, see “Note Regarding Picture Quality” above).

Cable lead-in
or antenna
Stereo VCR
S-VIDEO VIDEO L OUT R
IN	IN from ANT	OUT to TV
		CH3
OUT	OR	CH4
	TV	IN			OUT
	VIDEO			COLOR	ANT
			VIDEO STREAM		VIDEO
				INPUT
	L/		Y		L/
			L
	MONO				MONO
OR
	AUDIO		AUDIO PB		AUDIO
		R	R	PR	R
		VIDEO-1	VIDEO-2

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

The VIDEO-2 jacks can be used for connecting a second piece of video equipment, such as a DVD player or camcorder (see “Note Regarding Picture Quality” above).

Connecting a cable converter box

This connection allows you to watch cable and premium channels. Tune the TV to channel 3 or 4 (whichever channel is vacant in your broadcast area), and then use the converter box to change channels.

You will need:

• one coaxial cable

From cable

	TV			OUT
IN OUT	IN
			COLOR	ANT
	VIDEO	VIDEO STREAM		VIDEO
			INPUT
	L/	Y		L/
		L
Cable	MONO			MONO
	S-VIDEO
converter box
	AUDIO	AUDIO PB		AUDIO
	R	R	PR	R
	VIDEO-1	VIDEO-2

Note:

When you use a converter box with your TV, you may not be able to program certain features using the remote control, such as blocking channels or programming your favorite channels.

Operation Section Reference

5