Set up

Preparing the remote control for use

Your TV remote control can operate your TV together with most VCR models and cable TV converters, even if they are different brands.

If you have a Toshiba VCR, your TV remote control is already programmed to operate it (see page 10).

If you have a non-Toshiba VCR and/or cable TV converter, you must first program your remote control so it will operate the other equipment (see pages 11–13).

Preparation

Basic Operation

Installing the remote control batteries1 Slide the battery cover off the back of the remote control.

Press and slide to remove.

Caution:

Dispose of batteries in a designated disposal area. Do not throw batteries into a fire.

Do not mix battery types or combine used batteries with new ones.

Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.

If you do not intend to use the remote control for a long time, remove the batteries.

Reference Section Advanced Operation

2 Install two “AA” size batteries, making sure to match the + and – signs on the batteries to the signs on the battery compartment.

Note:

If your Toshiba TV remote control does not operate all of the features of your VCR or cable TV converter, you may need to use the remote control that came with your other equipment.

3 Slide the battery cover back onto the remote control until the lock snaps.

8