Manuals / Brands / TV and Video / CRT Television / Toshiba / TV and Video / CRT Television

Toshiba 32A41 up Set, Section, Preparation, You will need:, You will need:, one coaxial cable, one coaxial cable, •one coaxial cable, •one coaxial cable

1 35

Download 35 pages, 1.55 Mb

Connecting a DVD player with component video and a VCR

This connection allows you to watch DVD, VCR, and TV programs, and record TV programs. Your TV has ColorStream™ (component video) connections. Connecting your TV to a component video–compatible DVD player (such as a Toshiba DVD player with ColorStream™) can greatly enhance picture quality and performance.

up Set

You will need:

•one coaxial cable

•three pairs of audio cables (two single and one pair of audio cables for a mono VCR)

•two video cables (or, if your DVD player has component video, one video cable and one set of component video cables; see “Note Regarding Picture Quality” on page 5).

Caution:

The unauthorized recording of television programs, videotapes, and other materials may infringe upon the provisions of copyright laws.

Note:

●To watch the VCR, the TV must select VIDEO-1.

●To watch the DVD player, the TV must select VIDEO-2.

From Antenna

Stereo VCR

S-VIDEO VIDEO	AUDIO
	L	R
		IN	IN from ANT OUT to TV
			CH3
		OUT	CH4

TV

IN			OUT
		COLOR	ANT
VIDEO	VIDEO STREAM		VIDEO
		INPUT
L/	Y		L/
L/	L		L/
MONO	L		MONO
MONO			MONO
OR
AUDIO	AUDIO PB		AUDIO
R	R	PR	R
VIDEO-1	VIDEO-2	PR
VIDEO-1	VIDEO-2

	1	L	R		Y	PR PB

	2	L	R	VIDEO S-VIDEO
				VIDEO OUT	COMPONENT VIDEO OUT

AUDIO OUT

Preparation

Operation Basic Advanced

DVD player with component video

Connecting two VCRs

This connection allows you to record (dub/edit) from one VCR to another VCR while watching a videotape. You also can record from one TV channel while watching another channel.

Operation Reference

You will need:

•one coaxial cable

•two pairs of audio cables (two single audio cables for mono VCRs)

•two video cables (for video cable type, see “Note Regarding Picture Quality” on page 5).

Caution:

The unauthorized recording of television programs, videotapes, and other materials may infringe upon the provisions of copyright laws.

Note:

Do not connect the same VCR to both output and input jacks on the TV.

To record (dub/edit) from VCR 1 to VCR 2, the TV must select VIDEO-1, and VCR 2 must select LINE IN.

From Antenna
VCR1
S-VIDEO VIDEO AUDIO
L R
IN	IN from ANT OUT to TV
	CH3
OUT	CH4
	TV			OUT
	IN			OUT
			COLOR	ANT
	VIDEO	VIDEO STREAM		VIDEO
			INPUT
	L/	Y		L/
	L/	L		L/
	MONO	L		MONO
	MONO			MONO
OR
	AUDIO	AUDIO P		AUDIO
	R	R	P	R
	VIDEO-1 VIDEO-2		P
	VIDEO-1 VIDEO-2
	VCR2
		AUDIO
			IN	IN from ANT OUT to TV
				CH3
			OUT	CH4

Section

7

Contents

up Set Preparation Operation Basic Operation Advanced Section Reference CAUTION ATTENTION Note to CATV system installers in the USA Precautions Introduction Connecting your TV Preparing the remote control for use Location of controls on TV and remote control Using the remote control with a VCR or Set up Reference Section Advanced Operation Basic Operation Exploring your new TV 36A41 32A41 Audio and video cables are usually NOTE REGARDING PICTURE QUALITY When connecting video equipment, such as a VCR or DVD player: –For GOOD picture quality: Use regular video cables For BETTER picture quality: If your equipment has (continued) Connecting a cable converter box and a VCR Connecting a satellite receiver and a VCR Connecting a DVD player with component video and a VCR Connecting two VCRs •two pairs of audio cables (two single audio cables for mono VCRs) Section Installing the remote control batteries 1 Slide the battery cover off the back of the remote control 3 Slide the battery cover back onto the remote control until the lock snaps For details on the use of each control, refer to pages in brackets TV front panel Model 32A41 Model 36A41 Remote control Point the remote control at the VCR or cable TV converter Channel Number –If the correct code was entered, the VCR or converter will turn off If the correct code was entered –If the VCR or converter does not respond, repeat steps 1–4using another code If the VCR or converter does not respond to a different code VCR code table Cable TV converter code table Page Turning the TV set on Selecting the on-screendisplay language Understanding the Auto Power Off feature Understanding the Last Mode Memory feature TV/CABLE function CH PROGRAM function ADD/ERASE function 4 To add the channel: To erase the channel: Operation Basic Operation Selecting a TV channel Select a channel in one of the following two ways: ●Scan through the programmed channels in numerical sequence: –Press CHANNEL s to select the next higher channel RTN Adjusting the picture quality Pressing Selection To reset the Picture and Sound adjustments to the factory settings Selecting the color temperature The color temperature modes change the color tones of the picture 1 Press MENU until the Picture 2 menu is displayed on-screen 2 Press t or s until COLOR TEMPERATURE is displayed in purple 3 Press T or S until the desired mode is displayed in purple You can adjust the sound quality (BASS, TREBLE and BALANCE) to suit your taste Adjusting the sound quality 1 Press MENU until the Audio menu is POWERdisplayed on-screen 2 Press s or t until the item you want to Setting the off-timer Canceling the off-timer Stereo Sound: SAP: Surround Sound: Listening to stereo sound Activating the surround sound effect Listening to a second audio program (SAP) To deactivate the SAP feature: Programming your favorite channels Selecting your favorite channels Viewing captions or text Opening the V-CHIPCONTROL menu Adjusting the V-CHIPCONTROL menu Adjusting the V-CHIPCONTROL menu (continued) Unblocking programs temporarily BLOCK CHANNEL function Page Page For additional information, visit our web site: ATTENTION CANADIAN CONSUMERS: TOSHIBA AMERICA CONSUMER PRODUCTS, INC PRINTED IN USA