14

Overview of cable types

Cables can be purchased from most stores that sell
audio/video devices. Before purchasing any
cables, be sure of connector types required by your
devices and the length of each cable.

Coaxial (F-type) cable

Coaxial (F-type) cable is used for connecting your
antenna, cable TV service, and/or cable converter
box to the
TUNER
input on your TV.

Standard A/V cables (red/white/yellow)

Standard A/V cables (composite video) usually come
in sets of three, and are for use with video devices with
analog audio and composite video output. These cables
(and the related inputs on your TV) are typically color-
coded according to use: yellow for video, red for stereo
right audio, and white for stereo left (or mono) audio.

Component video cables (red/green/blue)

Component video cables come in sets of three and are
for use with video devices with component video output.
(ColorStream® is Toshiba’s brand of component video.)
These cables are typically color-coded red, green, and
blue. Separate audio cables are required for a complete
connection.
Note: Component video cables provide better
picture performance than a standard (composite)
video.

HDMI® cable (with HDMI Logo “ ”)

HDMI (High-Definition Multimedia Interface) cable is
for use with devices with an HDMI output.
An HDMI cable delivers digital audio and video in its
native format. This cable carries both video and audio
information; therefore, separate audio cables are not
required for a complete HDMI device connection
(page 17, 18 and page 20).
Note: An HDMI cable provides the best audio
and picture performance.

Optical audio cable

Optical audio cable is for connecting receivers with
Dolby Digital or PCM (Pulse-Code Modulation) optical
audio input to the TV’s DIGITAL AUDIO OUT terminal
(page 19).

Analog RGB (15-pin) computer cable

Analog RGB (15-pin) computer cable is for connecting
a PC to the TV’s PC IN terminal (page 20).
Note: Separate audio cables are required for
a complete connection.

3.5mm Stereo to RCA Y-cable

3.5mm Stereo to RCA Y-Cable is for connecting audio
signal from DVI device to TV.

About the connection illustrations

You can connect different types and brands of devices to
your TV in several different configurations. The connection
illustrations in this manual are representative of typical
device connections only. The input/output terminals on
your devices may differ from those illustrated herein. For
details on connecting and using your specific devices, refer
to each device’s owner’s manual.

Connecting TV to a power source

To connect AC power:
120 V, 60 Hz
outlet
AC cord
Note:
•Never connect the AC cord plug to other
than the specified voltage (120 V, 60 Hz).
•If you cause a static discharge when
touching the LCD TV / DVD combination and
it fails to function, simply unplug the LCD TV /
DVD combination from the AC outlet and plug
it back in. The LCD TV / DVD combination
should return to normal operation.
Chapter 2: Connecting your TV