21

Preparing the remote control for

use

The remote control can operate your LCD TV /
DVD combination and control the basic functions
of connected audio/video devices if you connect
a REGZA-LINK® compatible audio receiver or
playback device ( page 50).

Installing the remote control

batteries

1無 Open the battery lid at the bottom of
remote controller.
Push!
2無 Insert the batteries, corresponding to
the (+) and (-) markings on the battery
compartment.
3無 Reattach the battery cover.
Caution: Batteries must not be exposed
to excessive heat such as sunshine, fire or
the like.
Note:
•Be sure to use AAA size batteries.
•Dispose of batteries in a designated disposal
area.
•Batteries should always be disposed of with
the environment in mind. Always dispose of
batteries in accordance with applicable laws
and regulations.
•If the remote control does not operate
correctly, or if the operating range becomes
reduced, replace batteries with new ones.
•When necessary to replace batteries in the
remote control, always replace both batteries
with new ones. Never mix battery types or use
new and used batteries in combination.
•Always remove batteries from the remote
control if they are dead or if the remote
control is not to be used for an extended
period of time. This will prevent battery acid
from leaking into the battery compartment.
Chapter 3: Using the remote control