
5.You may now set up the LOCKS menu. See “Using the
To change your password:
1.Press MENU, then press or
to display the LOCKS menu.
2.Press ▲ or ▼ to display the password entering mode.
3.Use the Channel Number buttons
4.Press ▲ or ▼ to highlight NEW PASSWORD and press or
to display the NEW PASSWORD menu.
5.Use the Channel Number buttons
ENTER.
6.Enter the password again to confirm it, and then press ENTER.
7.Press EXIT to return to normal viewing.
Locking channels
With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels unless you clear the setting. You can choose to lock up to nine TV channels and nine cable channels.
To lock channels:
1.Select a channel you want to lock.
2.Press MENU, then press or
to display the LOCKS menu.
3.Press ▲ or ▼ to display the password entering mode.
4.Use the Channel Number buttons
menu appears.LOCKCHVIDEGAMELCPASSWORDSOPANELTIMLOCKKOFF
5.Press ▲ or ▼ to highlight CH
LOCK and press or to display FRONTNEW:SELECT LOCK :ADJUST
the CH LOCK menu.
6.Press or
to select the follow-
then press ENTER. The LOCKS
ing:
•SET: to set the channel as one to
be locked. Then press ENTER.
• CLEAR: to clear all channels from
the list of locked channels. Then press ENTER.
7. Repeat steps 1 through 6 to lock other channels. When you are
finished locking channels, press EXIT to return to normal viewing. If you try to tune a locked channel, the TV will not display it, but will display the nearest unlocked channel.
Mute
Recall
Channel
Numbers
Channel 3 4
Menu/
Enter
Exit
Note:
If you forget your password, press RECALL four times within five seconds while the TV is in password entering mode. This allows you to reset your password.
Safeguards | Important |
ToshibaWelcome to
yourConnecting TV
Remote ControlUsing the
your TVSetting up
To unlock channels:
1.Press MENU, then press or
to display the LOCKS menu.
2.Press ▲ or ▼ to display the password entering mode.
3.Use the Channel Number buttons
4.Press ▲ or ▼ to highlight CH LOCK and press or
to display the CH LOCK menu.
5.Press or
to highlight CLEAR and clear all channels from the list of locked channels. Press ENTER.
6.Press EXIT to return to normal viewing.
Note:
After programming CH LOCK, change channels before turning off the television.
FeaturesUsing the TV’s
25
Appendix
25 | 29/03/2005, 1:49 AM |