• Returns you to the NETWORK menu.
3 Press the [OTHER] button.
| • The OTHER screen is displayed. |
|
4 | Press the [ENABLE] button to enable the LDAP network service, or | 4 |
[DISABLE] button to disable it. |
•Optionally you can enter the trap community name for the SNMP Traps by pressing the [SNMP READ COM- MUNITY] button.
When you press this button, the QWERTY Type Keyboard screen is displayed. Enter the value using the key- board and digital keys, and press the [ENTER] button to set the entry.
5 Press the [ENTER] button.
6 Continue to another network setting if required, then press the [APPLY NOW] button.
• This equipment starts initializing the network interface card to apply the changes.
119