Toshiba 6000 Series Using a PS/2 mouse simultaneously with AccuPoint II

125
Expansion Options
Using a mouse
Using a PS/2 mouse simultaneously with
AccuPoint II
To configure the PS/2 mouse to work with the AccuPointII:
1Open the Start menu, click Control Panel then Printers and
Other Hardware.
2Click the Tosh ib a HW Se tup icon.
3Select the Pointing Devices tab.
4Under Pointing Devices Options, select one:
❖Auto-selected — configures the PS/2 mouse to work
when it is connected at power on, or the AccuPoint II to
work otherwise. Auto-selected is normally the default
option.
❖Simultaneous — configures both the AccuPoint II mouse
and PS/2 mouse to work with the computer at the same
time. You must reboot the computer for the settings to
take effect.
HINT: When Auto-selected is the default, the computer can’t
detect a PS/2 mouse if you connect it after booting the
computer.
This can be changed in Toshiba Hardware Setup.
5Click OK.
A message appears stating “The changes will take effect next
time the machine is rebooted. Reboot the machine now?”
6Click Yes.
The computer reboots, and the PS/2 mouse is activated.