93
Learning the Basics
Using SD® (Secure Digital) cards
Do not remove a SCSI card while any of the SCSI devices
connected to it are operating.
Before removing a PC Card, stop it by clicking the Safely
Remove Hardware icon on the System tray. After the PC Card is
stopped, it is safe to remove.
Using SD® (Secure Digital) cards
If you do not already have a SD card inserted in the computer, you
may do so following the procedures outlined in “Inserting an
SD®card” on page 159.
Important: Do not use the Copy Disk function for SD cards. In
order to copy data from one SD card to another, use the following
procedure:
1Format the target SD card in the same format as the source SD
card.
2Insert the source SD card.
3Create a temporary folder on the hard disk drive.
4Copy the contents of the source SD card into the temporary
folder you created in step 3.
5Remove the source SD card.
6Insert the target SD card created in step 1.
7Copy the file contents from the temporary folder to the target
SD card.
8Eject the target SD card.