Toshiba 6000 Series Removing a module from the Slim SelectBay

152 Enhancing Productivity
Using Slim SelectBay® modules
Removing a module from the Slim SelectBay®
NOTE: Use caution when lifting or turning your computer.
Failure to do so may result in damage to components, such
as cables, attached to your computer, or to the computer
itself.
1Turn off the computer.
You may also hot swap a module in the Slim SelectBay. Stop
the module by clicking the Safely Remove Hardware icon
on the System tray. After the module is stopped, it is safe to
remove.
2Slide the Slim SelectBay ejection bar towards the front of the
computer.
Unlatching the Slim SelectBay®
3Slide the module out of the computer.