71
Getting Started
Connecting a local printer
NOTE: If you connect a PS/2 mouse to the computer while it
is in Standby mode, you will not be able to use the mouse
when you turn the computer on.
To set the PS/2 mouse to work simultaneously with the
AccuPointII:
1Click Start, then Control Panel, then Printers and Other
Hardware.
2Click the Tosh iba HWSetup icon.
3Select the Pointing Devices tab, then click Simultaneous.
Connecting a local printer
NOTE: Read the documentation that came with your printer.
Follow the manufacturer’s instructions when connecting a
local printer.
NOTE: You must supply the proper printer cable. If one did
not come with your printer, you may purchase one from an
electronics or computer store.
If your printer is ECP- or IEEE-compliant, make sure your
printer cable is an IEEE 1284 cable.
CAUTION: Your printer documentation may require you to
install the printer software before physically connecting the
printer to your computer. If you do not install the software as
instructed by the printer manufacturer, the printer may not
function correctly.