Getting Started

71

Connecting a printer

If your printer does not support Plug and Play, you can set up the printer as described in “Setting up a printer” on page 71.

To connect a printer to your computer:

1Connect the printer cable to the printer and then connect the other end to one of the computer’s USB ports.

2Plug the printer’s power cable into a live AC outlet.

Setting up a printer

NOTE

Some printers require a specific installation process. Refer to your

 

printer installation guide for instructions before completing the

 

following procedure.

 

 

If your printer does not support Plug and Play, follow these steps to set it up for the first time. You only need to set up the printer once.

1Click Start, Control Panel, Hardware and Sound, and then under Printers, click Add a printer.

The Add Printer Wizard appearss.

(Sample Image) Add Printer Wizard

2Follow the on-screen instructions to set up your printer.

Page 71
Image 71
Toshiba A135, A130 manual Setting up a printer, Following procedure, Sample Image Add Printer Wizard