The Keyboard

Display selection: Press Fn + F5 to change the active display device. When you press these hot keys a dialog box appears. Only selectable devices will be displayed. Hold down Fn and press F5 again to change the device. When you release Fn and F5, the selected device will change. If you hold down the keys for three seconds the selection will return to LCD.

Display brightness: Pressing Fn + F6 decreases the display brightness. When you press these hotkeys, the current setting will be displayed for two seconds by a pop-up icon. You can also change this setting through the Monitor brightness item of the Power Save Mode window in Power Saver.

Display brightness: Pressing Fn + F7 increases the display brightness. When you press these hotkeys, the current setting will be displayed for two seconds by a pop-up icon. You can also change this setting through the Monitor brightness item of the Power Save Mode window in Power Saver.

Wireless LAN: Pressing Fn + F8 turns the Wireless LAN off and on. In order for this to properly work, the Wireless LAN Kill Switch in the computer’s left side must be switched on as well.

Touch pad: Pressing Fn + F9 enables or disables the Touch pad function. When you press these hotkeys, the current setting will change and be displayed as an icon.

Resolution: Pressing Fn + Spacebar allows you to cycle through available monitor resolutions.

Satellite A30 Series

5-5