A300

You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting:

U

Selects the USB diskette drive.

 

 

N

Selects the network.

 

 

1

Selects the primary HDD.

 

 

2

Selects the secondary HDD.

 

 

C

Selects the CD-ROM*.

This procedure does not affect the settings.

* In this computer, CD-ROM refers to the DVD Super Multi (+-R DL) drive.

ExpressCard HDD boot is not supported.

To change the boot drive, follow the steps below.

1.Hold down F12 and boot the computer.

2.Use the up/down cursor keys to select boot device you want and press

ENTER.

■If a supervisor password is set, the menu above does not appear when you use the user password to start the computer.

■The selection method above does not change the boot priority settings in HW Setup.

■If you press a key other than one of those above or if the selected device is not installed, the system will boot according to the current setting in HW Setup.

Keyboard

Wake-up on Keyboard

When this feature is enabled and the computer is in sleep mode, you can turn on the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in sleep mode.

Enabled

Enables the Wake-up on Keyboard.

 

 

Disabled

Disables the Wake-up on Keyboard. (Default)

 

 

User’s Manual

7-5