Toshiba A300 USB mouse, Fingerprint sensor

A300

USB mouse

This section applies only with Windows Vista™ operating system.

	Problem	Procedure
	On-screen pointer does	The system might be busy. If the pointer is
	not respond to mouse	shaped as an hourglass, wait for it to resume its
	operation	normal shape and try again to move it.
		Make sure the mouse is properly connected to
		the USB port.
	Double-clicking does	Try changing the double-click speed setting in
	not work	the mouse control utility. Click Start -> Control
		Panel ->Hardware and Sound ->Mouse to
		access it.
	The mouse pointer	Try changing the double-click speed setting in
	moves too fast or too	the mouse control utility. Click Start -> Control
	slow	Panel ->Hardware and Sound ->Mouse to
		access it.
	The mouse pointer	The mouse might be dirty. Refer to your mouse
	moves erratically	documentations for instructions on cleaning.
		If problems persist, contact your dealer.
Fingerprint sensor
	Problem	Procedure
	Reading of the	Please try again using the correct posture. Refer
	fingerprint was not	to Using the fingerprint sensor in Chapter 4,
	successful	Operating Basics.
		Try the recognition process again using another
		enrolled finger.
	The fingerprint cannot	Try the recognition process again using another
	be read due to injuries	enrolled finger.
	to the finger	If fingerprints from all the enrolled fingers cannot
		be read, please logon by using the keyboard to
		input the password for the time being.
		If problems persist, contact your dealer.
	Fingerprint Single-	Please use TOSHIBA HW Setup to register the
	Swipe Sign-On feature	User Password if it was not registered.
	cannot be enabled

9-10 User’s Manual