A300

 

 

 

TV output signal

 

 

Problem

Procedure

 

 

 

 

Display on TV is poor

Make sure the TV type is correct for your area:

 

 

NTSC (US, JAPAN), PAL (Europe).

 

 

 

 

No display

Try adjusting the contrast and brightness controls

 

 

on the external monitor.

 

 

Press hot keys FN + F5 to change the display.

 

 

Refer to Chapter 5, The Keyboard.

 

 

If problems persist, contact your dealer.

 

 

 

If you turn the computer off in hibernation and sleep mode while the display is on TV, the computer will select either the internal LCD or an external computer CRT as the display device.

USB

Refer also to your USB device’s documentation.

Problem

Procedure

 

 

USB device does not

Check for a firm cable connection between the

work

USB ports on the computer and the USB device.

 

Make sure the USB device drivers are properly

 

installed. Refer to your Windows documentation

 

for information on checking the drivers.

 

 

 

If you are using an operating system that does

 

not support USB, you can still use a USB mouse

 

and/or USB keyboard. If these devices do not

 

work, make sure the USB KB/Mouse Legacy

 

Emulation item in HW Setup is set to [Enabled].

 

If problems persist, contact your dealer.

 

 

User’s Manual

9-13