A300

 

 

 

 

 

 

 

Problem

Procedure

 

External devices

Some external devices may not work when

 

connected to the

connected to a compatible port when the USB

 

compatible ports do

Sleep and Charge function is [Enabled] in the

 

not work when

HW Setup.

 

connected to a

Reconnect the external device after turning ON

 

compatible port

 

the computer.

 

 

 

 

If the external device still does not work, connect

 

 

device to an USB port that does not have the

 

 

USB Sleep and Charge function-compatible icon

 

 

( ) or change the USB Sleep and Charge

 

 

function setting to [Disabled] in the HW Setup.

 

 

 

 

The USB WakeUp

When USB Sleep and Charge function is set to

 

function does not work

[Enabled] in the HW Setup, the USB WakeUp

 

 

function does not work for ports that support the

 

 

USB Sleep and Charge function. In that case,

 

 

use an USB port that does not have the USB

 

 

Sleep and Charge function-compatible icon ( )

 

 

or change the USB Sleep and Charge function

 

 

setting to [Disabled ] in the HW Setup.

 

 

 

eSATA/USB combo port

Refer also to your eSATA device and USB device’s documentation.

Problem

Procedure

e/SATA device or USB

Check for a firm cable connection between the

device does not work

eSATA/USB combo port on the computer and the

 

eSATA device or USB device.

 

Make sure the eSATA device or USB device

 

drivers are properly installed. Refer to your

 

Windows documentation for information on

 

checking the drivers.

 

 

 

If you are using an operating system that does

 

not support USB, you can still use a USB mouse

 

and/or USB keyboard. If these devices do not

 

work, make sure the USB KB/Mouse Legacy

 

Emulation item in HW Setup is set to [Enabled].

 

If problems persist, contact your dealer.

 

 

User’s Manual

9-15