A300

■Avoid the following finger conditions for enrollment or recognition as they may result in fingerprint enrollment errors or a drop in the fingerprint recognition success rate

■Soaked or swollen finger (e.g. after taking bath)

■Injured finger

■Wet finger

■Soiled or oily finger

■Extremely dry skin condition on finger

Observe the following to improve the fingerprint recognition success rate.

■Enroll two or more fingers.

■Enroll additional fingers if recognition failure occurs often using enrolled fingers.

■Check your finger condition. Changed conditions, such as injured, rough, extremely dry, wet, soiled, dirty, oily, soaked, swollen fingers, may lower the recognition success rate. Also if the fingerprint is worn down or the finger becomes thinner or fatter, the recognition success rate may be lowered.

■The fingerprint for each finger is different and unique. Please ensure that only the registered or enrolled fingerprint or fingerprints are used for identification.

■Check sliding position and speed.

■The fingerprint sensor compares and analyzes the unique characteristics in a fingerprint. However, there may be instances where certain users are unable to register their fingerprints due to insufficient unique characteristics in their fingerprints.

■The recognition success rate may differ from user to user.

Fingerprint sensor limitations

■The fingerprint sensor compares and analyzes the unique characteristics in a fingerprint.

■A warning message will be displayed when recognition is abnormal or recognition is not successful within a fixed duration.

■The recognition success rate may differ from user to user.

■Toshiba does not guarantee that this fingerprint recognition technology will be error-free.

■Toshiba does not guarantee that the fingerprint sensor will recognize the enrolled user or accurately screen out unauthorized users at all times.Toshiba is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.

4-4

User’s Manual