A300

7.In case of finger injury or authentication failure, it is recommended that another fingerprint also be enrolled. The following message will be displayed: [We recommended enrolling at least two fingerprint images.] Click OK and repeat steps 3, 4, 5 and 6 with another finger.

How to delete the fingerprint data

Saved fingerprint data is stored in the Non-volatile memory inside the fingerprint sensor. If you hand over the PC to others, or dispose of it, the following operations are recommended.

1.Click Start, point to All Programs, point to TrueSuite Access Manager and click it.

2.The TrueSuite Access Manager Fingerprint Software screen is displayed.

3.Enter your Windows Password and click Next to enter the Control Center. Or swipe your enrolled finger to enter the Control Center.

4.The user’s fingers screen is displayed.■To delete all registered fingerprints:1.Click Delete All Fingerprint2.Follow the on-screen instructions to delete the registered fingerprints■To delete individual fingerprints:1.Click the fingerprint mark above the registered finger

2.Are you sure you want to delete this fingerprint? will be displayed on screen, click Yes button.

3.When Delete All Fingerprints is selected, the user selection screen will be displayed, so select which user’s fingerprint data to delete.

■Selecting Delete current user’s fingerprints will delete the fingerprint data for the currently logged in user.

■Selecting Delete all users’ fingerprints will delete the fingerprint data for all users, however this item can only be selected if the currently logged in user has administrator privileges.

A message will be displayed asking for confirmation to delete the fingerprint.

4-6

User’s Manual