Toshiba A300 i.LINK (IEEE1394), Precautions, Settings for audio on HDMI, Click, Click, Click, Click, Click, Click the, 3.MO drives, 1.Click Start, 4.Click Sound, Start

A300

Settings for audio on HDMITo set the audio device to use the HDMI, follow the steps below.1.Click Start.2.Click Control Panel.3.Click Hardware and Sound.4.Click Sound.5.Click Playback tab.6.Click HDMI Device.7.Click the Set Default button.To set the audio device to use internal speaker, follow the steps below.

1.Click Start.

2.Click Control Panel.

3.Click Hardware and Sound.

4.Click Sound.

5.Click Playback tab.

6.Click Speakers.

7.Click the Set Default button.

i.LINK (IEEE1394)

i.LINK (IEEE1394) is used for high-speed data transfer for a range of compatible devices such as

1.Digital video cameras2.Hard disk drives3.MO drives4.CD-RW drives

i.LINK uses a four-pin connector, which does not carry electric current. External devices will need their own power supply.

Precautions

■Make a back-up of your data before transferring it to the computer. There is a possibility that the original data will be damaged. There is a particular risk that some frames will be deleted in the case of digital video transfer. TOSHIBA assumes no liability for such loss of data.

■Do not transfer data in areas where static electricity is easily generated or in areas subjected to electronic noise. Data can be destroyed.

■If you are transferring data through an IEEE1394 hub, do not connect or disconnect other devices from the hub during data transfer. There is a likelihood that data will be damaged. Connect all devices to the hub before you turn on the computer’s power.

8-12 User’s Manual