A300

2. Grasp the drawer gently and pull until it is fully opened.

Figure 4-5 Pulling the drawer open

3. Lay the CD/DVD, label side up, in the drawer.

Figure 4-6 Inserting a CD/DVD

When the drawer is fully opened, the edge of the computer will extend slightly over the CD/DVD tray. Therefore, you will need to turn the CD/DVD at an angle when you place it in the tray. After seating the CD/DVD, however, make sure it lies flat, as shown in above figure.

■Do not touch the laser lens. Doing so could cause misalignment.

■Do not keep foreign matter from entering the drive. Check the back edge of the tray to make sure it carries no debris before closing the drive.

4.Press gently at the center of the CD/DVD until you feel it click into place. The CD/DVD should lie below the top of the spindle, flush with the spindle base.

4-12

User’s Manual