Toshiba B-480-QP owner manual Option, Ribbon

2. SPECIFICATIONS

ENGLISH VERSION EO1-33007

2.2 Option

2.2 Option

Option Name	Type	Usage
Swing cutter module	B-4205-QM	A stop and cut swing cutter
Rotary cutter module	B-8204-QM	Rotary cutter
Peel off module	B-4905-H-QM	This allows use of on-demand (peel-off) operation or to
		rewind labels and backing paper together when using the
		rewind guide plate. To purchase the strip module, please
		inquire at your local distributor.
Fanfold paper guide	B-4905-FF-QM	This is a paper guide exclusively used for fanfold paper.
module		Attaching it in place of the standard paper guide allows the
		printer to print on fanfold paper.
PCMCIA interface	B-8700-PC-QM	This board enables the following PCMCIA cards to be used.
board		* LAN card: 3 COM EtherLink®III (recommended)
		3 COM 3CCE589ET (recommended)
		* ATA card: Conforming to PC card ATA standard
		* Flash memory card:1MB and 4MB cards (See Page 7-1.)
Expansion I/O interface	B-8700-IO-QM	Installing this board allows connection to external device.
board

2.3 Ribbon

Type	Spool type
Width	68 mm ~ 112 mm
Length	600 m
Outer diameter	ø90 mm (max.)

NOTES: 1. "On the fly issue" means that the printer can draw and print without stopping between labels.

2.To ensure print quality and print head life use only TOSHIBA TEC specified media and ribbons.

3.When using the cutter ensure that label length B plus inter label gap length E exceeds 35 mm. (i.e. label pitch should be greater that 35 mm.) (See Page 2-3.)

4.When rewinding the media onto the take-up spool in batch mode, the max. outer roll diameter should be 180 mm.

5.Use of rough media for the ribbon saving issue may cause ribbon smudges.

E2-2