E5-1
5. LOADING THE MEDIA ENGLISH VERSION EO1-33007
Fig. 5-1
NOTES: 1.When the head lever is turned to position
2
, the print head is raised.
2.When the head lever is turned to position
3
, the print head and the pinch roller are raised.
3.To allow printing the head lever must be set to position
1
. (This ensures that the print head
and the pinch roller are closed.)
3. Untape the supply holder.
4. Turn the outside supply holder 30 degrees and remove from the supply shaft.
5. LOADING THE MEDIA
WARNING:
1. Do not touch moving parts. To reduce the risk that fingers, jewelry, clothing, etc., be drawn
into the moving parts, push the switch in the “OFF” position to stop movement.
2. To avoid injury, be careful not to catch or jam your fingers while opening or closing the cover.
5. LOADING THE MEDIA
Top Cover
Ribbon Shaft Holder Plate
Head Lever
The printer prints both labels and tags.
1. Turn off the power and open the top cover.
2. Turn the head lever to position 3, then release the ribbon shaft holder plate.
Supply Holder
(FMHD0005502)
30
Supply Shaft
Fig. 5-2
NOTE: Set the inside supply holder to the scale on the shaft according to media to be used.