10. TROUBLESHOOTING | ENGLISH VERSION |
| 10. TROUBLESHOOTING |
|
|
Problem |
| Solution |
|
|
|
No print. | 1. | Check that media and the ribbon is loaded correctly. |
| 2. | Check whether the print head is set correctly or not. |
| 3. | Check the cabling between the printer and the host. |
|
| |
Dots missing in the print. | Dirty print head. ➔ Clean the print head. | |
| Call your Authorized Service representative if necessary. | |
|
|
|
Unclear (or blurred) printing. | 1. | Dirty print head. ➔ Clean the print head. |
| 2. | Bad or faulty ribbon. ➔ Replace ribbon. |
| 3. | Poor media quality. ➔ Change media type. |
|
|
|
Power does not come on. | 1. | Plug power cord into an AC socket. |
| 2. | Check the circuit breakers or fuses. |
| 3. | Plug another appliance into the AC socket to check if |
|
| there is power supplied. |
| Call your Authorized Service representative if necessary. | |
|
| |
Printer does not cut. | Check for a paper jam in the cutter. | |
| Call your Authorized Service representative if necessary. | |
|
|
|
You see a raised nap where the media | 1. | Clean the cutter blades. |
has been cut. | 2. | The blades are worn. |
|
| ➔ Call your Authorized Service representative. |
|
|
|
