2. PRINTER SETUP
ENGLISH VERSION
2.7 Loading the Media
2.7Loading the Media (Cont.)
When a media roll has an outside diameter exceeding 127 mm (5”) or an inner core diameter of 38.1 mm (1.5”), the optional External Media Roll Hanger is required.
1.Fit the protrusions on the bottom of the printer into the holes in the External Media Roll Hanger.
External Media Roll
Hanger (Option)
2.Load a media roll onto the printer’s Media Holder Ass’y, and place it into the cuts of the External Media Roll Hanger.
3.Pull the media forward and insert the leading edge into the printer so that it passes between the Rear Media Guides.
4.Manually move the Rear Media Guides so that the media is centred.
Rear Media Guides
Media Holder
Ass’y
External Media
Roll Hanger
When the media roll has the inner core diameter of 76.2 mm (3”), use the
5.Refer to the previous pages to complete the media loading.
6.Close the Top Cover.
