2. PRINTER SETUP
ENGLISH VERSION
2.7 Loading the Media
2.7Loading the Media (Cont.)
6.Insert the both ends of the Media Shaft into the slots of the printer to place the Media Holder Ass’y into the printer. Make sure that the media feeds from the top, as shown below.
Media Shaft
Media Holder Ass’y
Slot
NOTE: Media path
Media Hold Shaft
Platen | Black mark sensor |
7.Insert the leading edge of the media under the Media Hold Shaft, and feed the media between the Media Guides.
8.Pull the media until it extends past the Media Outlet.
Media Hold Shaft
Media Outlet 
Media Guide
9.Manually adjust the Media Guide position to the media width.
Media Guide
10.Make sure that the media path through the printer is straight, otherwise a skew feeding or a paper jam may occur.
E2- 8
