2. PRINTER SETUP
ENGLISH VERSION
2.8 Loading the Ribbon
2.8Loading the Ribbon (Cont.)
NOTES:
1.Take up any slack in the ribbon.
2Do not load a ribbon when using a direct thermal media.
5.Pull the leader tape of the ribbon downward, and feed it under the Print Head.
6.Attach the leader tape to the Paper Core with adhesive tape.
Paper Core | Ribbon Roll |
| |
Print Head |
|
7.Rotate the Paper Core to take up the ribbon leader tape until it is thoroughly covered by the black section of the ribbon.
8.Close the Ribbon Access Cover and Top Cover.
