Toshiba BDX5400 owner manual Preparation, Prepare the remote control

4 Preparation

Always follow the instructions in this chapter in sequence.

Note:

-Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Prepare the remote control

1.Open the battery cover.

2.Insert two AAA batteries with correct polarity (+/-) as indicated.

3.Close the battery cover.

Notes:

-If you are not going to use the remote control for a long time, remove the batteries.

-Do not use old and new or different types of batteries in combination.

-Risk of explosion! Keep battery away from heat, sunshine or fire. Never discard battery in fire.

•The maximum operable ranges from the unit are as follows.

-Line of sight: approx. 7 m

-Either side of the centre: approx. 5 m within 30°

-Above: approx. 5 m within 30°

-Below: approx. 5 m within 30°

Setting up the player

Find the correct viewing input

1.Press to turn on this product.

2.Turn on the TV and switch to the correct video-in input (refer to the TV user manual on how to select the correct input).

Initial Setting

When you turn on this unit for the first time, or

restore all settings to factory defaults, the system will prompt you to perform Easy Setup.

1.Follow the on-screen instructions to customize the following settings to your preference:

OSD Language Resolution Aspect ratio

2.After setting, press OK to confirm and exit.

Use the SETTING menu

1.Press SETTING to display the setup screen in stop mode or no disc playback.

Use the HOME menu

1.Press HOME to display the Home screen in stop mode or no disc playback.

English

5 m 7 m 5 m

11